Aquaforest AF Air Scrubber Media 2000ml
Aquaforest AF Air Scrubber Media 2000ml is a high-performance CO₂ absorbing media designed to help raise and stabilise pH in marine and reef aquariums. Used with the Aquaforest AF Air Scrubber reactor, this dry pellet media removes carbon dioxide from the air drawn into the protein skimmer, helping reduce pH drops and support a more stable reef aquarium environment.
Ideal for reef aquariums, SPS systems, LPS systems and mixed marine aquariums, Aquaforest AF Air Scrubber Media is especially useful in homes where indoor CO₂ levels are high, ventilation is limited or aquarium pH regularly falls below the desired range. With excellent CO₂ absorption properties and a built-in colour-change exhaustion indicator, it offers a simple and effective way to support pH stability and coral health.
Key Features
- CO₂ absorbing media for marine aquariums
- 2000ml pack size
- Designed for use with the Aquaforest AF Air Scrubber reactor
- Helps raise and stabilise aquarium pH
- Helps reduce day and night pH fluctuations
- Supports stable reef aquarium water chemistry
- Can help support coral condition and growth
- White dry pellet media with colour-change exhaustion indicator
- Easy to use and replace
- One pack provides a full AF Air Scrubber reactor refill
Product Overview
Aquaforest AF Air Scrubber Media has been developed for reef keepers who want to reduce the impact of indoor carbon dioxide on aquarium pH. In many homes, CO₂ levels can rise due to breathing, pets, cooking, closed windows and poor ventilation. When a protein skimmer draws this CO₂-rich air into the aquarium, it can contribute to lower pH, unstable dKH and reduced coral calcification.
AF Air Scrubber Media absorbs CO₂ from the air before it enters the protein skimmer. This helps reduce acidification and supports a more stable pH range, creating a better environment for corals, fish and other marine livestock.
Benefits for Reef Aquariums
Aquaforest AF Air Scrubber Media helps support reef stability by reducing harmful pH fluctuations caused by elevated CO₂. Stable pH is important for coral health, skeletal growth, calcification and general reef aquarium balance.
In reef aquariums, pH often drops at night when photosynthesis stops and oxygen demand increases. This can be more noticeable during autumn and winter when windows are closed and indoor ventilation is reduced. Using AF Air Scrubber Media can help reduce these swings and support a more consistent day and night pH profile.
Suitable For
Aquaforest AF Air Scrubber Media 2000ml is suitable for:
- Marine aquariums
- Reef aquariums
- SPS coral systems
- LPS coral systems
- Mixed reef aquariums
- Soft coral aquariums
- Marine systems using protein skimmers
- Aquariums affected by low pH
- Homes with high indoor CO₂ levels
- Aquaforest AF Air Scrubber reactors
This product is designed for marine aquarium CO₂ scrubbing and should be used with a suitable air scrubber reactor and compatible protein skimmer air intake.
How It Works
Aquaforest AF Air Scrubber Media is placed inside the AF Air Scrubber reactor. Air is pulled through the media by the protein skimmer before entering the skimmer air intake.
As the air passes through the media, carbon dioxide is absorbed. This reduces the amount of CO₂ entering the aquarium through the skimmer and helps support a higher, more stable pH. The pellet media fills the reactor chamber while still allowing air to pass through efficiently.
How to Use
Fill the Aquaforest AF Air Scrubber reactor with Aquaforest AF Air Scrubber Media.
Connect the reactor to the protein skimmer air intake using suitable hose and fittings. Ensure the air path is secure, with no leaks, kinks or restrictions. Once connected, the skimmer will pull air through the media before the air enters the skimmer body.
Monitor aquarium pH after installation to assess performance. Results can vary depending on room CO₂ levels, skimmer air draw, aquarium size, ventilation, media condition and overall gas exchange.
Usage Advice
Replace the media when it changes colour or when aquarium pH begins to drop back towards its previous level. Aquaforest recommends replacing the media before the colour change is complete for best performance.
The media is single-use only and cannot be regenerated or reused once exhausted. Do not attempt to dry, rinse or reactivate used media.
For best results, use with the dedicated Aquaforest AF Air Scrubber reactor and keep all hose connections clean, dry and secure.
When to Use
Aquaforest AF Air Scrubber Media is useful when:
- Reef aquarium pH is consistently lower than desired
- pH drops noticeably overnight
- Indoor CO₂ levels are high
- Windows are closed for long periods
- The aquarium is located in a poorly ventilated room
- SPS or LPS corals require more stable reef chemistry
- Coral growth or calcification may be limited by low pH
- A protein skimmer and AF Air Scrubber reactor are already installed
- Day and night pH swings need reducing
pH Support Advice
Aquaforest states that AF Air Scrubber Media can help raise pH by approximately 0.2–0.4 and support stabilisation in the range of 8.0–8.4, depending on aquarium conditions.
For best results, use alongside regular pH and alkalinity testing. Stable pH should be supported by good gas exchange, appropriate alkalinity, regular maintenance, suitable flow and balanced reef aquarium husbandry.
Do not use pH-raising equipment or additives without testing, as sudden changes in pH or alkalinity can stress corals and other livestock.
Maintenance Advice
Check the colour of the media regularly and replace it before it becomes fully exhausted.
Inspect the air scrubber reactor, hose and skimmer air intake during routine maintenance. Salt creep, moisture, dust or blocked tubing can reduce air flow and lower the effectiveness of the scrubber system.
Keep the media dry before use and store unused product in a sealed container away from moisture. Moisture exposure may reduce the effectiveness of CO₂ absorbing media.
Product Details
Product: Aquaforest AF Air Scrubber Media
Brand: Aquaforest
Pack Size: 2000ml
Product Type: CO₂ absorbing air scrubber media
Aquarium Type: Marine
Media Form: White dry pellets
Use: CO₂ absorption, pH support and reef aquarium stability
Application: Refill media for AF Air Scrubber reactor
Replacement Indicator: Colour-change media
Reusability: Single-use only, cannot be regenerated
Suitable For: Aquaforest AF Air Scrubber, protein skimmer air intake systems and reef aquariums affected by low pH
Why Choose Aquaforest AF Air Scrubber Media?
Aquaforest AF Air Scrubber Media is a strong choice for reef keepers who want to improve pH stability by reducing CO₂ before it enters the aquarium. By treating the air drawn into the protein skimmer, it targets one of the common causes of low reef aquarium pH: elevated indoor carbon dioxide.
The colour-change exhaustion indicator makes it easy to see when the media is being used up, while the 2000ml pack provides a full refill for the Aquaforest AF Air Scrubber reactor. For reef aquariums where coral growth, calcification and stable water chemistry are priorities, AF Air Scrubber Media offers a simple and effective pH support solution.
Recommended For
Aquaforest AF Air Scrubber Media 2000ml is recommended for marine aquarists using the Aquaforest AF Air Scrubber reactor who want to reduce CO₂ intake, raise pH and improve day/night pH stability. It is especially useful for SPS, LPS and mixed reef aquariums where stable pH, alkalinity balance and coral growth are important.
Aquaforest AF Air Scrubber Media 2000ml
Aquaforest AF Air Scrubber Media 2000ml is a high-performance CO₂ absorbing media designed to help raise and stabilise pH in marine and reef aquariums. Used with the Aquaforest AF Air Scrubber reactor, this dry pellet media removes carbon dioxide from the air drawn into the protein skimmer, helping reduce pH drops and support a more stable reef aquarium environment.
Ideal for reef aquariums, SPS systems, LPS systems and mixed marine aquariums, Aquaforest AF Air Scrubber Media is especially useful in homes where indoor CO₂ levels are high, ventilation is limited or aquarium pH regularly falls below the desired range. With excellent CO₂ absorption properties and a built-in colour-change exhaustion indicator, it offers a simple and effective way to support pH stability and coral health.
Key Features
- CO₂ absorbing media for marine aquariums
- 2000ml pack size
- Designed for use with the Aquaforest AF Air Scrubber reactor
- Helps raise and stabilise aquarium pH
- Helps reduce day and night pH fluctuations
- Supports stable reef aquarium water chemistry
- Can help support coral condition and growth
- White dry pellet media with colour-change exhaustion indicator
- Easy to use and replace
- One pack provides a full AF Air Scrubber reactor refill
Product Overview
Aquaforest AF Air Scrubber Media has been developed for reef keepers who want to reduce the impact of indoor carbon dioxide on aquarium pH. In many homes, CO₂ levels can rise due to breathing, pets, cooking, closed windows and poor ventilation. When a protein skimmer draws this CO₂-rich air into the aquarium, it can contribute to lower pH, unstable dKH and reduced coral calcification.
AF Air Scrubber Media absorbs CO₂ from the air before it enters the protein skimmer. This helps reduce acidification and supports a more stable pH range, creating a better environment for corals, fish and other marine livestock.
Benefits for Reef Aquariums
Aquaforest AF Air Scrubber Media helps support reef stability by reducing harmful pH fluctuations caused by elevated CO₂. Stable pH is important for coral health, skeletal growth, calcification and general reef aquarium balance.
In reef aquariums, pH often drops at night when photosynthesis stops and oxygen demand increases. This can be more noticeable during autumn and winter when windows are closed and indoor ventilation is reduced. Using AF Air Scrubber Media can help reduce these swings and support a more consistent day and night pH profile.
Suitable For
Aquaforest AF Air Scrubber Media 2000ml is suitable for:
- Marine aquariums
- Reef aquariums
- SPS coral systems
- LPS coral systems
- Mixed reef aquariums
- Soft coral aquariums
- Marine systems using protein skimmers
- Aquariums affected by low pH
- Homes with high indoor CO₂ levels
- Aquaforest AF Air Scrubber reactors
This product is designed for marine aquarium CO₂ scrubbing and should be used with a suitable air scrubber reactor and compatible protein skimmer air intake.
How It Works
Aquaforest AF Air Scrubber Media is placed inside the AF Air Scrubber reactor. Air is pulled through the media by the protein skimmer before entering the skimmer air intake.
As the air passes through the media, carbon dioxide is absorbed. This reduces the amount of CO₂ entering the aquarium through the skimmer and helps support a higher, more stable pH. The pellet media fills the reactor chamber while still allowing air to pass through efficiently.
How to Use
Fill the Aquaforest AF Air Scrubber reactor with Aquaforest AF Air Scrubber Media.
Connect the reactor to the protein skimmer air intake using suitable hose and fittings. Ensure the air path is secure, with no leaks, kinks or restrictions. Once connected, the skimmer will pull air through the media before the air enters the skimmer body.
Monitor aquarium pH after installation to assess performance. Results can vary depending on room CO₂ levels, skimmer air draw, aquarium size, ventilation, media condition and overall gas exchange.
Usage Advice
Replace the media when it changes colour or when aquarium pH begins to drop back towards its previous level. Aquaforest recommends replacing the media before the colour change is complete for best performance.
The media is single-use only and cannot be regenerated or reused once exhausted. Do not attempt to dry, rinse or reactivate used media.
For best results, use with the dedicated Aquaforest AF Air Scrubber reactor and keep all hose connections clean, dry and secure.
When to Use
Aquaforest AF Air Scrubber Media is useful when:
- Reef aquarium pH is consistently lower than desired
- pH drops noticeably overnight
- Indoor CO₂ levels are high
- Windows are closed for long periods
- The aquarium is located in a poorly ventilated room
- SPS or LPS corals require more stable reef chemistry
- Coral growth or calcification may be limited by low pH
- A protein skimmer and AF Air Scrubber reactor are already installed
- Day and night pH swings need reducing
pH Support Advice
Aquaforest states that AF Air Scrubber Media can help raise pH by approximately 0.2–0.4 and support stabilisation in the range of 8.0–8.4, depending on aquarium conditions.
For best results, use alongside regular pH and alkalinity testing. Stable pH should be supported by good gas exchange, appropriate alkalinity, regular maintenance, suitable flow and balanced reef aquarium husbandry.
Do not use pH-raising equipment or additives without testing, as sudden changes in pH or alkalinity can stress corals and other livestock.
Maintenance Advice
Check the colour of the media regularly and replace it before it becomes fully exhausted.
Inspect the air scrubber reactor, hose and skimmer air intake during routine maintenance. Salt creep, moisture, dust or blocked tubing can reduce air flow and lower the effectiveness of the scrubber system.
Keep the media dry before use and store unused product in a sealed container away from moisture. Moisture exposure may reduce the effectiveness of CO₂ absorbing media.
Product Details
Product: Aquaforest AF Air Scrubber Media
Brand: Aquaforest
Pack Size: 2000ml
Product Type: CO₂ absorbing air scrubber media
Aquarium Type: Marine
Media Form: White dry pellets
Use: CO₂ absorption, pH support and reef aquarium stability
Application: Refill media for AF Air Scrubber reactor
Replacement Indicator: Colour-change media
Reusability: Single-use only, cannot be regenerated
Suitable For: Aquaforest AF Air Scrubber, protein skimmer air intake systems and reef aquariums affected by low pH
Why Choose Aquaforest AF Air Scrubber Media?
Aquaforest AF Air Scrubber Media is a strong choice for reef keepers who want to improve pH stability by reducing CO₂ before it enters the aquarium. By treating the air drawn into the protein skimmer, it targets one of the common causes of low reef aquarium pH: elevated indoor carbon dioxide.
The colour-change exhaustion indicator makes it easy to see when the media is being used up, while the 2000ml pack provides a full refill for the Aquaforest AF Air Scrubber reactor. For reef aquariums where coral growth, calcification and stable water chemistry are priorities, AF Air Scrubber Media offers a simple and effective pH support solution.
Recommended For
Aquaforest AF Air Scrubber Media 2000ml is recommended for marine aquarists using the Aquaforest AF Air Scrubber reactor who want to reduce CO₂ intake, raise pH and improve day/night pH stability. It is especially useful for SPS, LPS and mixed reef aquariums where stable pH, alkalinity balance and coral growth are important.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Aquaforest AF Air Scrubber Media 2000ml is a high-performance CO₂ absorbing media designed to help raise and stabilise pH in marine and reef aquariums. Used with the Aquaforest AF Air Scrubber reactor, this dry pellet media removes carbon dioxide from the air drawn into the protein skimmer, helping reduce pH drops and support a more stable reef aquarium environment.
Ideal for reef aquariums, SPS systems, LPS systems and mixed marine aquariums, Aquaforest AF Air Scrubber Media is especially useful in homes where indoor CO₂ levels are high, ventilation is limited or aquarium pH regularly falls below the desired range. With excellent CO₂ absorption properties and a built-in colour-change exhaustion indicator, it offers a simple and effective way to support pH stability and coral health.
Key Features
- CO₂ absorbing media for marine aquariums
- 2000ml pack size
- Designed for use with the Aquaforest AF Air Scrubber reactor
- Helps raise and stabilise aquarium pH
- Helps reduce day and night pH fluctuations
- Supports stable reef aquarium water chemistry
- Can help support coral condition and growth
- White dry pellet media with colour-change exhaustion indicator
- Easy to use and replace
- One pack provides a full AF Air Scrubber reactor refill
Product Overview
Aquaforest AF Air Scrubber Media has been developed for reef keepers who want to reduce the impact of indoor carbon dioxide on aquarium pH. In many homes, CO₂ levels can rise due to breathing, pets, cooking, closed windows and poor ventilation. When a protein skimmer draws this CO₂-rich air into the aquarium, it can contribute to lower pH, unstable dKH and reduced coral calcification.
AF Air Scrubber Media absorbs CO₂ from the air before it enters the protein skimmer. This helps reduce acidification and supports a more stable pH range, creating a better environment for corals, fish and other marine livestock.
Benefits for Reef Aquariums
Aquaforest AF Air Scrubber Media helps support reef stability by reducing harmful pH fluctuations caused by elevated CO₂. Stable pH is important for coral health, skeletal growth, calcification and general reef aquarium balance.
In reef aquariums, pH often drops at night when photosynthesis stops and oxygen demand increases. This can be more noticeable during autumn and winter when windows are closed and indoor ventilation is reduced. Using AF Air Scrubber Media can help reduce these swings and support a more consistent day and night pH profile.
Suitable For
Aquaforest AF Air Scrubber Media 2000ml is suitable for:
- Marine aquariums
- Reef aquariums
- SPS coral systems
- LPS coral systems
- Mixed reef aquariums
- Soft coral aquariums
- Marine systems using protein skimmers
- Aquariums affected by low pH
- Homes with high indoor CO₂ levels
- Aquaforest AF Air Scrubber reactors
This product is designed for marine aquarium CO₂ scrubbing and should be used with a suitable air scrubber reactor and compatible protein skimmer air intake.
How It Works
Aquaforest AF Air Scrubber Media is placed inside the AF Air Scrubber reactor. Air is pulled through the media by the protein skimmer before entering the skimmer air intake.
As the air passes through the media, carbon dioxide is absorbed. This reduces the amount of CO₂ entering the aquarium through the skimmer and helps support a higher, more stable pH. The pellet media fills the reactor chamber while still allowing air to pass through efficiently.
How to Use
Fill the Aquaforest AF Air Scrubber reactor with Aquaforest AF Air Scrubber Media.
Connect the reactor to the protein skimmer air intake using suitable hose and fittings. Ensure the air path is secure, with no leaks, kinks or restrictions. Once connected, the skimmer will pull air through the media before the air enters the skimmer body.
Monitor aquarium pH after installation to assess performance. Results can vary depending on room CO₂ levels, skimmer air draw, aquarium size, ventilation, media condition and overall gas exchange.
Usage Advice
Replace the media when it changes colour or when aquarium pH begins to drop back towards its previous level. Aquaforest recommends replacing the media before the colour change is complete for best performance.
The media is single-use only and cannot be regenerated or reused once exhausted. Do not attempt to dry, rinse or reactivate used media.
For best results, use with the dedicated Aquaforest AF Air Scrubber reactor and keep all hose connections clean, dry and secure.
When to Use
Aquaforest AF Air Scrubber Media is useful when:
- Reef aquarium pH is consistently lower than desired
- pH drops noticeably overnight
- Indoor CO₂ levels are high
- Windows are closed for long periods
- The aquarium is located in a poorly ventilated room
- SPS or LPS corals require more stable reef chemistry
- Coral growth or calcification may be limited by low pH
- A protein skimmer and AF Air Scrubber reactor are already installed
- Day and night pH swings need reducing
pH Support Advice
Aquaforest states that AF Air Scrubber Media can help raise pH by approximately 0.2–0.4 and support stabilisation in the range of 8.0–8.4, depending on aquarium conditions.
For best results, use alongside regular pH and alkalinity testing. Stable pH should be supported by good gas exchange, appropriate alkalinity, regular maintenance, suitable flow and balanced reef aquarium husbandry.
Do not use pH-raising equipment or additives without testing, as sudden changes in pH or alkalinity can stress corals and other livestock.
Maintenance Advice
Check the colour of the media regularly and replace it before it becomes fully exhausted.
Inspect the air scrubber reactor, hose and skimmer air intake during routine maintenance. Salt creep, moisture, dust or blocked tubing can reduce air flow and lower the effectiveness of the scrubber system.
Keep the media dry before use and store unused product in a sealed container away from moisture. Moisture exposure may reduce the effectiveness of CO₂ absorbing media.
Product Details
Product: Aquaforest AF Air Scrubber Media
Brand: Aquaforest
Pack Size: 2000ml
Product Type: CO₂ absorbing air scrubber media
Aquarium Type: Marine
Media Form: White dry pellets
Use: CO₂ absorption, pH support and reef aquarium stability
Application: Refill media for AF Air Scrubber reactor
Replacement Indicator: Colour-change media
Reusability: Single-use only, cannot be regenerated
Suitable For: Aquaforest AF Air Scrubber, protein skimmer air intake systems and reef aquariums affected by low pH
Why Choose Aquaforest AF Air Scrubber Media?
Aquaforest AF Air Scrubber Media is a strong choice for reef keepers who want to improve pH stability by reducing CO₂ before it enters the aquarium. By treating the air drawn into the protein skimmer, it targets one of the common causes of low reef aquarium pH: elevated indoor carbon dioxide.
The colour-change exhaustion indicator makes it easy to see when the media is being used up, while the 2000ml pack provides a full refill for the Aquaforest AF Air Scrubber reactor. For reef aquariums where coral growth, calcification and stable water chemistry are priorities, AF Air Scrubber Media offers a simple and effective pH support solution.
Recommended For
Aquaforest AF Air Scrubber Media 2000ml is recommended for marine aquarists using the Aquaforest AF Air Scrubber reactor who want to reduce CO₂ intake, raise pH and improve day/night pH stability. It is especially useful for SPS, LPS and mixed reef aquariums where stable pH, alkalinity balance and coral growth are important.
